Hot-swap circuits are among those measures put in place to protect equipment or personnel, or both. Some power supplies, for example, have built-in and adjustable current limiting (standard in ...

Here at Hackaday we really like to feature projects that push the limits of what’s possible, or ones that feature some new and exciting technology that nobody has ever seen before. So what’s so ...

This current-limiting circuit, shown in this example as part of a small bench power supply, could in principle be used in conjunction with any dual-rail current source. The part of the circuit to the ...

A. An overcurrent device (typically a fast-acting fuse) that reduces the fault current to a magnitude substantially less than that obtainable in the same circuit if the current-limiting device wasn’t ...

Adding a clamp circuit to the well known current-limiter protects the "pass" transistor from over-currents when load faults occur. Most readers are probably familiar with two-terminal current-limiting ...

At a power-on cycle, inrush current, if not limited, can peak to tens of even hundreds of amps when capacitive load is present, thereby increasing the probability of failure and decreasing usable ...

Industrial automation customers can improve their short-circuit protection with a new line of current-limiting, molded-case circuit breakers from Rockwell Automation. The line expands the ...

Littelfuse claims that its CPC1561B Solid State Relay (SSR) is the highest current (1 A, 60 V) normally-open SSR currently available on the market to integrate both current limiting and thermal ...

Resistors are fundamental components in electronic circuits. Despite their simplicity, they play a central role in ensuring ...

Designed and dual-rated for AC and DC applications, the Eaton FAZ-NA and FAZ-NA-L series current-limiting miniature circuit breakers from AutomationDirect offer protection for application with up to ...

The circuit protection market is filled with such a wide variety of fuses today that the previously accepted method of specifying fuses is just not enough. Instead, the proper application of fuses in ...